STOMP USER GUIDE, TROUBLESHOOTING
FUNCTIONS
Power ON / OFF:
Press and hold the “O” button for 2s. If not connected to a Bluetooth®
device or connected but idle (not playing audio) the speaker will turn OFF
automatically after 15 min.
Play / Pause:
Press the “ ” button once to play or pause audio.
Volume Up:
Press “+” button to increase the volume.
Volume Down:
Press “-” button to decrease the volume.
Next Track:
Press and hold “+” button for 2s to skip track.
Previous Track:
Press and hold “-” button for 2s to go to last track.
Bluetooth® Pairing:
Press and hold the “Bluetooth®” button for 2s to enter Bluetooth® Pairing
Mode. The speaker will disconnect from any paired device and will become
available to pair to new devices. The speaker will stay in pairing mode for 60s,
or until connected. Status LED will blink blue while in Bluetooth® Pairing Mode.
True Wireless Stereo Pairing:
Press the “TWS” button on any two Stomp™ speakers to pair them together
and play audio in stereo. Status LED will be cyan to indicate Right channel and
yellow to indicate Left channel.
Exit True Wireless Stereo Mode:
Press the “TWS” button to exit TWS pairing.
SKDY Multi-link™ Transmitting:
First, connect to the Stomp™ speaker by BT, AUX, or USB-A audio input
connection. Double press the "Multi-link™" button to set the speaker as
transmitting. Any receiving speaker enabled SKDY Multi-link™ will now be able
to join. Status LED will be purple.
SKDY Multi-link™ Mode Receiving:
Single press the “Multi-link™” button to set the speaker as receiving (the
speaker will automatically disconnect from any paired Bluetooth® devices).
Status LED will be green. Up to 99 receiving speakers can be connected to a
single transmitting speaker.
Check Battery Status:
The 4 LED indicators show the battery level. Press and hold “+” and “-“ buttons
together for 1s to initiate a voice prompt of the battery level.
Light Show Mode
Press and hold the “Light Show” button for 2s to turn the light show ON or
OFF. Single press the "Light Show" button to cycle between different light
show modes.
Strobe Light ON/OFF
Double press the "Light Show" button to toggle the strobe light ON or OFF.
Dual-Device Connection:
You can pair two transmitting devices (mobile phones for example) to the
Stomp™ speaker at the same time to DJ together. Pause the music on the
first device to play a song from the second device.
Charge Out:
While the speaker is ON, plug a USB-C™ or USB-A cable into the appropriate
port to begin charging your compatible portable device automatically.
CHARGING THE STOMP™
Use the USB-C™ cable included to connect the speaker to an appropriate
power source to begin charging. The LED indicators will show the battery is
charging. When all 4 LEDs are ON the battery is fully charged.
Warning:
1. To avoid damage to the speaker and battery, it is important to only use a
power source that matches the power requirements listed on the speaker’s
rating label.
2. To avoid overheating, it’s recommended not to place the speaker in direct
sunlight, especially while charging and playing music.
Battery status indication (not charging):
0-5% - speaker is OFF all 4 LEDs are OFF
5-10% - 1st LED blinks white, status LED blinks red
10-25% - 1st LED is ON white, other LEDs are OFF
25-50% - 1st + 2nd LEDs are ON white, other LEDs are OFF
50-75% - 1st + 2nd + 3rd LEDs are ON white, other LEDs are OFF
75-100% - All LEDs are ON white
Battery status indication (while charging):
0-25% - 1st LED blinks white, other LEDs are OFF
25-50% - 1st LED is ON white, 2nd LED is blinking.
Other LEDs are OFF
50-75% - 1st + 2nd LEDs are ON white, 3rd LED is blinking.
Other LEDs are OFF
75-99% - 1st + 2nd + 3rd LEDs are ON white, 4th LED is blinking.
Other LEDs are OFF
100% - All 4 LEDs are ON white
CONNECTION PRIORITY
AUX > USB > BT (Bluetooth®)
To play from an AUX source, simply plug in an AUX cable to the speaker and
your audio source device. It will automatically have priority over USB and BT.
To play from a USB source, plug in a USB flash drive and make sure that AUX
is disconnected. It will automatically have priority over BT (but not over AUX).
To play from BT source, connect a Bluetooth® enabled device and make sure
that AUX and USB are disconnected.
TROUBLESHOOTING
Factory Reset:
Press and hold "-" and "+" buttons at the same time for 10s to initiate factory
reset. The speaker will revert to factory settings and all previously paired devices
will be deleted. Status LED will blink between blue and red while resetting.
Low Battery:
If the speaker’s battery is fully depleted, it may not turn ON immediately even
when connected to a power source. Please plug the speaker into an
appropriate power source and let it charge for at least 10 minutes before
turning it ON.
Speaker is not playing wirelessly:
If the speaker is not playing audio although it’s connected to a Bluetooth™
device, it may be because of the audio connection priority. Disconnect any
AUX or USB-A connections to the speaker and try again.
SPECIFICATIONS
Bluetooth® Version：5.3
Battery Capacity: 11.1V/3600mAh
Charging Input: DC 5V/2.2A
Playtime: 12 hours (Based on 77dBSPL(c) with light show OFF)
Charging Time: 4.5-5 hours
Operating Range: 10M
Rated Power: 40W+10W
Audio Inputs: Bluetooth®, USB-A, Aux 3.5mm
Charging Outputs: USB-C, USB-A
Battery Standby Time: 365 Days
IPX Rating: IPX7 (water immersion of 1m, for up to 30 min)